DeWalt D23620-XE Manual de Instruções

D23620-XE HEAVY-DUTY CIRCULAR SAWINSTRUCTION MANUAL

10OPERATIONWARNING: • Always observe the safety instructions and applicable regulations. • Ensure the material to be sawn is firmly secured in place

11unit, transportation prepaid, to any DEWALT Service Centre, or any authorised service station. For warranty repair information, call (AUS) 1800 654

DEWALT Industrial Tool Co., 20 Fletcher Road, Mooroolbark, VIC 3138 Australia (03 8720 5100) • 5 Te Apunga Place, Mt Wellington, New Zealand (09 259

3Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to

43) PERSONAL SAFETYa) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are ti

5Extension CordsCAUTION: Use only extension cords that are approved by the country’s Electrical Authority. Before using extension cords, inspect them

6a complete stop. Never attempt to remove the saw from the work or pull the saw backward while the blade is in motion or kickback may occur. Investiga

7Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ve

8Depth of cut adjustment (Fig. 2, 3) 1. Loosen the depth adjustment knob (L). 2. Move the shoe (E) to obtain the correct depth of cut. 3. Tighte

9 3. Loosen the bevel adjustment knob (I). 4. Place a square against the blade and shoe to adjust the 90° setting. Adjust the stop (N) using an he