DeWalt DCH213 Manual de Instruções descarregar pdf (Página 8)

• NEVER attempt to connect 2 chargers together.

• The charger is designed to operate on standard 230 V household electrical

power. Do not attempt to use it on any other voltage. This does not apply to the

vehicular charger.

Chargers

Your tool uses a DEWALT charger. Be sure to read all safety instructions before using

your charger. Consult the chart at the end of this manual for compatibility of chargers

and battery packs.

Charging Procedure (Fig. 1)

FIG. 1

1. Plug the charger into an appropriate outlet

before inserting the battery pack.

2. Insert the battery pack (G) into the charger, as

shown in Figure 1, making sure the pack is fully

seated in charger. The red (charging) light will

blink continuously, indicating that the charging

process has started.

3. The completion of charge will be indicated by

the red light remaining ON continuously. The

pack is fully charged and may be used at this

time or left in the charger.

Indicator Light Operation

PACK CHARGING

PACK CHARGED

HOT/COLD DELAY

PROBLEM PACK OR CHARGER

PROBLEM POWERLINE

Charge Indicators

This charger is designed to detect certain problems that can arise. Problems are indicated

by the red light flashing at a fast rate. If this occurs, re-insert the battery pack into the

charger. If the problem persists, try a different battery pack to determine if the charger

is working properly. If the new pack charges correctly, then the original pack is defective

and should be returned to a service center or other collection site for recycling. If the new

battery pack elicits the same trouble indication as the original, have the charger and the

battery pack tested at an authorized service center.

HOT/COLD DELAY

This charger has a hot/cold delay feature: when the charger detects a battery that is

hot, it automatically starts a delay, suspending charging until the battery has cooled.

After the battery has cooled, the charger automatically switches to the pack charging

mode. This feature ensures maximum battery life. The red light flashes long, then

short while in the hot/cold delay mode.

LEAVING THE BATTERY PACK IN THE CHARGER

The charger and battery pack can be left connected with the charge indicator showing

Pack Charged.

WEAK BATTERY PACKS: Weak batteries will continue to function but should not be

expected to perform as much work.

FAULTY BATTERY PACKS: This charger will not charge a faulty battery pack. The

charger will indicate faulty battery pack by refusing to light or by displaying problem pack

or charger.

NOTE: This could also mean a problem with a charger.

Important Charging Notes

1. Longest life and best performance can be obtained if the battery pack is charged

when the air temperature is between 18 ° – 24 °C (65 °F and 75 °F). DO NOT

charge the battery pack in an air temperature below +4 °C (+40 °F), or above

+40 °C (+105 °F). This is important and will prevent serious damage to the

battery pack.

2. The charger and battery pack may become warm to the touch while charging.

This is a normal condition, and does not indicate a problem. To facilitate the

cooling of the battery pack after use, avoid placing the charger or battery pack in

a warm environment such as in a metal shed or an uninsulated trailer.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

DeWalt DCH213 Manual de Instruções Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas elétricas DeWalt DCH213